Micro Switch

Let’s Check Out Submersible Pump with Float Switch

What is a submersible pump with float switch?

A submersible pump with a float switch is a type of water pump that is designed to be submerged in water, such as in a well, pond, or sump pump pit. The pump is typically made up of a motor, impeller, and other components that work together to move water from one place to another.

What is a submersible pump with float switch

The float switch is a device that is connected to the pump and is designed to turn the pump on and off as needed. It consists of a small, hollow ball or cylinder that floats on the surface of the water. When the water level rises, the float switch rises with it, triggering the pump to turn on and start pumping water out of the well, pond, or sump pit. When the water level falls below a certain point, the float switch drops down and turns the pump off.

The use of a float switch with a submersible pump is important because it helps to prevent the pump from running dry. Running a pump without water can cause damage to the pump motor, which can be costly to repair or replace. With a float switch, the pump will only turn on when there is enough water present, ensuring that the motor is always properly lubricated and cooled by the water it is pumping.

How a submersible pump work with a float switch?

A submersible pump with a float switch works by using the float switch to control the pump’s operation. Here’s how it works:

Submersion: The submersible pump is designed to be fully submerged in water, typically in a well, pond, or sump pit.

Water Level Detection: The float switch is a small device that is connected to the pump with a cord. It is designed to float on the surface of the water, and as the water level rises or falls, the float switch will move up or down accordingly.

Activation: When the water level rises to a certain point, the float switch will rise with it and activate the pump. This allows the pump to start pumping water out of the well, pond, or sump pit.

Operation: Once the pump is activated, it will continue to run until the water level drops below a certain point, causing the float switch to lower and turn off the pump. This helps to prevent the pump from running dry, which can cause damage to the pump’s motor.

Continuous Cycle: The submersible pump with a float switch will continue to cycle on and off as needed to maintain the water level in the well, pond, or sump pit. This ensures that the pump is always functioning properly and that the water is being pumped out effectively.

In summary, a submersible pump with a float switch uses a simple but effective mechanism to control the pump’s operation and ensure that it is working efficiently and effectively.

The submersible pump with float switch repairing

Repairing a submersible pump with a float switch can be a complicated process that should be performed by a qualified professional. However, here are some basic steps that can be taken if you suspect that your submersible pump with a float switch is not working properly:

Check the power supply: First, make sure that the pump is receiving power by checking the circuit breaker or fuse that controls the pump. If the power supply is functioning properly, move on to the next step.

Check the float switch: Check the float switch for any damage or debris that may be preventing it from moving freely. If the switch is damaged, it may need to be replaced.

Check the pump motor: Check the pump motor for any damage or debris that may be preventing it from working properly. If the motor is damaged, it may need to be repaired or replaced.

Check the impeller: Check the impeller for any damage or debris that may be preventing it from turning. If the impeller is damaged, it may need to be repaired or replaced.

Check the electrical connections: Check all of the electrical connections between the pump and the power supply to make sure they are secure and not damaged.

If you are unable to identify the problem or feel uncomfortable attempting to repair the pump yourself, it is recommended that you contact a qualified professional to perform the repairs. A professional will have the knowledge and experience necessary to safely and effectively repair your submersible pump with a float switch.

The float switch inner structure

The inner structure of a float switch can vary depending on the specific type and design of the switch, but most float switches consist of the following basic components:

Float: The float is a hollow ball or cylinder that is typically made of plastic or metal. It is designed to float on the surface of the water and move up and down as the water level changes.

Shaft: The shaft is a long, thin rod that is attached to the float and extends down into the water.

Switch: The switch is typically located at the top of the shaft, and it is activated by the movement of the float. The switch may be mechanical or electrical, depending on the specific type of float switch.

Housing: The housing is a protective covering that surrounds the float switch and helps to prevent it from becoming damaged or corroded.

Overall, the inner structure of a float switch is relatively simple, consisting of a float, shaft, switch, and housing. However, the design and construction of these components can vary depending on the specific application and requirements of the float switch.

The micro switch in float switch

The micro switch in float switch

In a float switch, the micro switch is typically located at the top of the shaft, and it is activated when the float moves up or down with changes in the water level. The micro switch contains a small spring-loaded lever or button that is triggered by the movement of the float, and when the lever or button is activated, it sends a signal to the submersible pump to turn on or off.

The micro switch is a reliable and durable component that can withstand the harsh conditions of a submersible pump environment. It is designed to operate under a wide range of temperatures and pressures, and it is resistant to corrosion and other types of damage that can occur in wet environments.

Overall, the micro switch plays a critical role in the operation of a float switch, allowing it to detect changes in the water level and trigger the submersible pump to turn on and off as needed.

In summary, the article tells us about the submersible pump with float switch definition, working principle, repairing, float switch inner and micro switch. Hope it will helpful to you to understand it. Meanwhile, Toneluck as a microswitch factory since 1976, it has reached experience in production and R&D as well as we have established a complete ERP management system and passed the ISO9001, ISO/TS16949 quality management system and ISO14001 environmental management system certification.

Related Articles

Back to top button